Whether it's a frozen line that burst over winter or old pipe corroding from the inside out, our Grafton, WI pipe repair team locates the damage and fixes it without unnecessary demolition.
Copper, PEX, CPVC, and galvanized steel repair are all within our Grafton technicians' regular scope of work.
We locate the exact leak point with detection equipment before opening any wall or slab.
An actively leaking pipe gets priority routing across Grafton to limit water damage.
You'll get a written price once the leak is located and the repair scope is clear.
These are the pipe issues we see most often across Grafton, WI.
We check nearby sections of pipe too, since one pinhole leak sometimes signals broader corrosion.
Soldered joint repairs and section replacements are handled to code, with proper flux and fitting technique.
PEX repiping is often faster and less invasive than replacing pipe in-kind.
Corroding galvanized pipe restricting water pressure gets replaced section by section or as a full re-pipe, depending on extent.
Electronic leak detection locates the exact point of a slab leak before any concrete is opened.
We repair the immediate break and can advise on insulation or heat tape for vulnerable lines.
Describe the leak symptoms to dispatch — visible water, a wet spot, or just a rising water bill all point to different urgency levels.
Trucks stocked for Grafton, WI's common pipe materials mean fewer follow-up visits for parts.
You'll know exactly what's being repaired and what it costs before we start.
The repair is completed, pressure-tested, and backed by a written warranty on parts and labor.
"Slab leak located with equipment before they cut into the floor. Kept the repair small." — Homeowner, Grafton
"Frozen pipe burst over a cold weekend, they repaired it and suggested insulation to prevent a repeat." — Grafton resident
"Soldered joint repair was clean work, no leaks since, and reasonably priced." — Grafton customer
Our pipe repair technicians cover Grafton and the surrounding Grafton, WI area, with detection equipment on every truck.
Electronic and acoustic leak detection equipment pinpoints the location before any demolition starts.
We'll assess the extent and give you honest numbers on spot repair versus full replacement.
Both are solid choices — we can walk through the tradeoffs for your specific situation.
Cost depends on leak location and accessibility; we'll quote a flat price once the leak is located.
Often yes — a single burst section can usually be spot-repaired rather than replacing the whole line.
We aim to minimize the opening required, though every slab leak is assessed individually.
Fast dispatch across Grafton, WI for active leaks.
Call +1-855-718-1500